Lumped element design approach provides optimal phase and amplitude balance and good isolation over broad bandwidth. Design package accommodates SMA, N, BNC and TNC connectors. Design modification may be necessary for non-SMA connectors.                                    


  • Broad Frequency Coverage
  • Excellent Phase & Amplitude
  • Good Isolation
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -55° to +85° C.

General Parameters:
Type: Quadrature 90°
Frequency: 110 to 1000 MHz
Low Frequency [MHz]: 110
High Frequency [MHz]: 1000
Insertion Loss [dB]: 3.5
Isolation [dB]: 20
VSWR 1 [:1]: 1.50:1
Amplitude Balance [dB]: 0.5
Phase Balance: 5 Degree
Power: 1 W

3D View

product-details ../