Operational Description - Although the term "power divider" has been applied to various devices meant to distribute power to a number of outputs, the term power divider here is used in a more restricted sense. A power divider has a single designated input port and more than one output port. All ports are theoretically matched and output ports are isolated from one another. It is usual, but not mandatory, for the transmission from the input port to be identical to all output ports. Quantic TRM applies the best use of stripline, coaxial, microstrip, Airstrip© and lumped element circuit topographies in our power divider designs.
Send your specific requirements within the quote form and allow us to offer an innovative application specific solution.
Brochures/Data Sheets/Product Guides/White Papers
Switched Power Dividers
The SWDL22030 is Quantic TRM's newest 0.5 GHz to 2.1 GHz switched power divider. It integrates a fail-safe switch into a compact package and is capable of operating over a wide temperature range allowing for operation in environments such as high altitude. Other features include a DC blocked RF path and a DC pass RF path. This part was designed to switch between two GPS receivers and two GPS antennas.
This compact unit operates from 0.5 to 2.1 GHz. Total insertion loss is less than 5 db and isolation is 20 dB input to input and input to output. Isolation output to output is 18 dB minimum. VSWR is nominal 1.5:1. It provides good phase and amplitude balance with ± 4° and ± 0.6 dB respectively. Switching speed is 10 ms max and power handling is 1 watt CW.
DL22030 Datasheet
DL 770-7way Power Divider
The SWDL22030 is TRM's newest 0.5 GHz to 2.1 GHz switched power divider. It integrates a fail-safe switch into a compact package and is capable of operating over a wide temperature range allowing for operation in environments such as high altitude. Other features include a DC blocked RF path and a DC pass RF path. This part was designed to switch between two GPS receivers and two GPS antennas.
This compact unit operates from 0.5 to 2.1 GHz. Total insertion loss is less than 5 dB and isolation is 20 dB input to input and input to output. Isolation output to output is 18 dB minimum. VSWR is nominal 1.5:1. It provides good phase and amplitude balance with ± 4° and ± 0.6 dB respectively. Switching speed is 10 ms max and power handling is 1 watt CW.
DL 770-7way Power Divider Datasheet
DL 82030 8-Way Ultra-Broadband Ferrite Power Divider, 0.02 - 3 GHz
The DL82030 is a broadband 8-way power divider that is suitable for radar and SatCom applications from 0.02 to 3 GHz. This reliable 8-way ferrite component is designed for systems requiring an even division of input power, providing signals at 8 output ports that are well balanced in amplitude and phase. The maximum amplitude balance is ± 0.4 dB while the phase balance between output ports is ± 4°. Isolation between output ports is at least 18 dB. The maximum input and output VSWR is 1.5:1. Model DL82030 is rated for input power levels to 2 W, and delivers output signals with maximum insertion loss of 4.5 dB. It is supplied in a rugged aluminum housing measuring 3.75 x 2.0 x 0.50 in. with SMA connectors. The power divider is designed for operating temperatures from -40°C to +70 °C.
8-Way Ultra-Broadband Ferrite Power Divider Datasheet
DL 62030 6-Way Power Divider, 20 - 3000 MHz
Model DL62030 has been added to Quantic TRMs' family of broadband power dividers covering the 20 - 3000 MHz frequency range. The DL 62030, 6-way is well suited for radar and satcom applications. The maximum amplitude balance is ± 1.0 dB while the phase balance is 5.0°. Isolation between output ports is 18 dB minimum. Input / output VSWR is 1.80:1 and insertion loss is 5 dB maximum. Model DL62030 is rated for CW input power levels to +30 dBm. It is supplied in a mechanical package 4.25 x 2.0 x 0.5 inches with standard SMA connectors. The power divider is designed to operate in temperatures from 0° to +40° C.
DL62030 6-Way Power Divider Datasheet
DL 162030 16-Way Power Divider, 20 - 3000 MHz
Model DL 162030 is a broadband, 16-way power divider that is well suited for radar and satellite-communications (satcom) applications from 20 to 3000 MHz. The reliable power divider is designed for systems requiring an even division of input power, providing signals at 16 output ports that are well balanced in amplitude and phase. The maximum amplitude balance is ±0.8 dB while the phase imbalance between output ports is ±10°. Isolation between output ports is at least 18 dB. The maximum input and output VSWR is 1.60:1. Model DL162030 is rated for +20 dBm Max Input Power, and delivers output signals with maximum insertion loss of 4.5 dB. It is supplied in a rugged aluminum housing measuring 9.4 x 3.0 x 0.40 in. with SMA connectors. The power divider is designed for operating temperatures from -15 to +55 °C.
162030 16-Way Power Divider
DL 42030 4-Way Power Divider, 20 - 3000 MHz
The DL42030 is the newest member of a family of power dividers/combiners and couplers delivering exceptional phase balance of ± 2°. Typically, it offers isolation performance of 15 dB while exhibiting insertion loss of 2.25 dB. The DL42030 provides input and output return losses of 14 dB, respectively while VSWR is a maximum of 1.50:1. Its amplitude balance is 0.3 dB and phase balance to 5°. The component handles maximum input power of 1 W. It measure 2.5 x 1.18 x 0.50 in. and comes standard with SMA female connectors. This rugged unit is designed to operate over the temperature range of -40° C to +70 °C. Military screening options are available upon request.
DL 42030 4-Way Power Divider Datasheet
DL 22030 2-Way Power Divider, 20 - 3000 MHz
The DL22030 broadband 2-way power divider is ideal for a wide range of wireless radio frequency microwave applications ranging from amplifier combining & receiver dividing to antenna splitting, and is suitable for networks from VHF to S band. The electrical performance of this ferrite component operating in the frequency range of 20-3000 MHz is highlighted with an excellent insertion loss of 2 dB max, 18 dB min isolation, 1.5:1 max input VSWR and 1.5:1 max output VSWR. Amplitude and phase balance are ±0.5 dB and ±4° respectively. Its power rating is 1 watt and the compact package size (1.25" x .7" x .5") allows this extremely lightweight component to fit into space limited locations. Tested temperature range is -40° to +70 °C. SMA connectors are standard.
DL 22030 2-Way Power Divider Datasheet
DMS1645 16-Way Power Divider Spans 2.5 To 6.5 GHz
The DMS 1645 broadband power divider is suitable for radar and ground-based satellite communications (satcom) applications requiring low-loss division of power from a single input to 16 output ports in the 2.5 to 6.5 GHz frequency range. This model is available with either BMA or SMA connector types. The maximum insertion loss is less than 1.8 dB at 6.5 GHz with minimum isolation of 20 dB. The maximum input VSWR is 1.5:1 and maximum output VSWR is 1.25:1. The 16-way power divider features excellent channel-to-channel balance, with amplitude balance of ±0.5 dB and phase balance of 8°. It is rated for maximum input power level of 30 W and tested over operating temperatures from -15° to +55 °C.
DMS1645 16-Way Power Divider
DMU 310X 3-Way Power Divider, in X Band
TRM's new 3-Way power divider is ideal for a wide range of wireless radio frequency applications and is designed for use in military and commercial airborne applications. The very light (less than 40 grams) DMU310X electrical performance is highlighted by 0.7 dB max insertion loss, greater than 18 dB isolation and 1.30:1 max input VSWR. Its unequal power split is displayed with two ports at -5.9 dB and one port at -3.8 dB with equal phase balance of ± 0.6 across all ports. Housing dimensions are 2.04 inches wide by 0.85 inches high and 0.5 deep (51.8 x 21.6 x 12.7 mm), the SMA connectors extend 0.375 inches (9.5mm). The tested operating temperature range is -55°C to +85 °C. Datasheet not available.
info@quantictrm.com
DMS 4319 4-WayPower Divider, 0.38 - 6 GHz
The DMS 4319 is Quantic TRM's latest addition to a line of very small power dividers with exceptional low insertion loss and amplitude, phase balance and unit to unit phase tracking. Its broad frequency range makes it suitable for a wide range of wireless communications applications, including in GPS, GSM, DCS, PCS, WiFi, Bluetooth, and IEEE 802.11a/b/g/n/y WLAN systems. Isolation between ports typically ranges from 14 dB to 18 dB, with typical insertion loss of 1.5 dB and maximum VSWR of 1.80:1. The divider boasts amplitude balance of typically ±0.3 dB and phase balance of typically ±4° across the full frequency range. The four-way power divider, which features an integrated broadband DC blocking capacitor, is rated for maximum input power of 30 W. It is supplied in a compact package measuring just 2.5 x 3.75 x 0.38 in. with side mounting surface and SMP connectors for space-limited locations.
DMS 4319 4-WayPower Divider Datasheet
DMS-648-ES 6-Way Power Divider, 6 - 20 GHz
The DMS-648-ES is a compact, airborne moisture sealed six-way power divider covering the frequency range of 6 to 20 GHz and is used in airborne radar and surveillance systems. This rugged broadband power divider provides low insertion loss of 8.7 dB with high isolation of 15 dB and an input/output return loss of 17.7 dB. Maximum amplitude and phase balances are 1.2 and 10° respectively. The packaging dimensions are 3.5 x 2.1 x .38 in. and weighs just over 5 ounces. SMA female connectors are standard. The tested operating temperature range is -55°C to +85 °C.
DMS-648-ES Datasheet