Power Dividers and Combiners


In-line configuration, UHF band dividers offer excellent amplitude and phase balance with high isolation and moderate power handling capabilities. Design package accommodates SMA, N, BNC and TNC connectors. Design modification may be necessary for non-SMA connectors. 


  • Excellent Amplitude Balance 
  • Excellent Phase Balance 
  • High Isolation
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -55° to +85° C.

General Parameters:
Type: 4-WAY
Freq Range: 0.250-0.500 GHz
Low Frequency [MHz]: 250
High Frequency [MHz]: 500
Insertion Loss [dB]: 0.5
Isolation [dB]: 20
VSWR [:1]: 1.25:1
VSWR2: 1.25:1
Amplitude Balance [dB]: 0.3
Phase Balance [deg]: 3
Input Power [W]: 30

3D View

product-details ../