Power Dividers and Combiners


In-line configuration, UHF band dividers offer excellent amplitude & phase balance with high isolation and moderate power handling capabilities. Design package accommodates SMA, N, BNC and TNC connectors. Design modification may be necessary for non-SMA connectors. 


  • Excellent Amplitude Balance
  • Excellent Phase Balance
  • High Isolation
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -55° to +85° C.

General Parameters:
Type: 2-WAY
Freq Range: 0.250-0.500 GHz
Low Frequency [MHz]: 250
High Frequency [MHz]: 500
Insertion Loss [dB]: 0.25
Isolation [dB]: 20
VSWR [:1]: 1.20:1
VSWR2: 1.20:1
Amplitude Balance [dB]: 0.2
Phase Balance [deg]: 1
Input Power [W]: 30

3D View

product-details ../