Power Dividers and Combiners


Lumped element design provides for low loss and optimal isolation at incremental frequencies within the 20-3000 MHz band. 


  • High Isolation
  • Low Loss
  • In-Line Configuration
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -40° to +70° C.

General Parameters:
Type: 4-WAY
Freq Range: 10-2000 MHz
Insertion Loss: 1.5 dB
Isolation: 23 dB
VSWR1: 1.70:1
VSWR2: 1.70:1
Amplitude Bal: 0.8 dB
Phase Bal: 8 Degree
Input Power: 5 W
product-details ../