Power Dividers and Combiners


The DL202 is part of TRM’s line of 2-Way Ferrite Transformer Dividers and used in a variety of signal routing and processing systems for Early Warning Detection and Signal Exploitation in Military Airborne and Shipboard applications. Frequency range is 0.1 – 100 MHz, featuring high isolation and low loss. Lumped element based circuit technology allows for a compact housing to be applied for all frequency bands offered in the series. Customizable to your spec requirements. Design package accommodates SMA, N, BNC and TNC connectors. Design modification may be necessary for N connectors. 


  • 50 Impedance Values
  • High Isolation
  • Low Loss
  • Standard SMA Connectors (N, BNC, TNC optional)

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate -55° to +85° C.

General Parameters:
Type: 2-WAY
Freq Range: 0.1-100 MHz
Low Frequency [MHz]: 0.1
High Frequency [MHz]: 100
Insertion Loss [dB]: 0.5
Isolation [dB]: 33
VSWR [:1]: 1.40:1
VSWR2: 1.40:1
Amplitude Balance [dB]: 0.2
Phase Balance [deg]: 2
Input Power [W]: 10

3D View

product-details ../